Best Hatchbox 3D Printer Filaments in 2017
Finding a good hatchbox filament may seem like an easy task, but it’s not like one has to look at the quality of the filament they are receiving and if they are reliable. There are several factors to consider when getting one that include material that are made with force, among other factors. Here is a complete review of some of the top 10 Hatchbox 3D printer strands you can choose to get.
10.HATCHBOX 1.75mm Gold PLA 3D Printer Filter – 1kg (2.2 lbs) reel – dimensional accuracy +/- 0.05mm
With an approximate weight of 1 KG, the filament of the 3D printer has a diameter between 1.70 mm and 1.80 mm. It has been made using the polylactic acid which has been sealed with the desiccant under vacuum. Its best operating nozzle temperature falls between 180-210 degrees Celsius. The filament has a spool diameter of 8 inches, a width of 2.5 inches and a hub hole diameter of 1.25 inches.
9. Filter NinjaFlex TPE, diameter 1.75 mm, 0.50 kg Coil, midnight
The NinjaFlex Tpe filament is supplied separately with the printer and is intended for use with fused filament 3D printers. The material used to make it, thermoplastic elastomer, makes it strong, flexible and leaves the printed parts with a great resistance to abrasion. The chances of the printed layers separating when the material is flexed or stretched are minimized. The filament should be used at temperatures of 210-235 degrees Celsius
8.Hatchbox Black PLA 3D 1.75mm Printer Filter – 1kg (2.2 lbs) reel – dimensional accuracy +/- 0.05mm
The reel weighs about 1 kilogram. The filament has a diameter of 1.75 mm with an accuracy of more or less than 0.05 mm. The filament of the 3D printer has been made using polylactic acid which has been sealed in vacuum with the desiccant. The temperatures within which the filament must be used are within 180-210 degrees Celsius.
7. HATCHBOX 1.75mm White 3D ABS Printer Filter – 1kg (2.2 lb) reel – dimensional accuracy +/- 0.05mm
This Hatchbox printer filament weighs about 1 kilogram and has a diameter of 1.75mm which has been measured to an accuracy of plus or minus 0.05mm. The filament was made using acrylonitrile butadiene styrene and then sealed under vacuum with desiccant. The filament is best used with the heated construction platform and a temperature range of 210-240 degrees Celsius.
6.HATCHBOX Blue PLA 3D Printer Filter 1.75mm – 1kg (2.2 lbs) reel – dimensional accuracy +/- 0.05mm
Made with polylactic acid and vacuum sealed with desiccant, this 3D printer filament weighs approximately 1 KG. Its diameter oscillates between 1.70 mm and 1.80 mm. The recommended nozzle temperatures within which the filament works best are between 180-210 degrees Celsius. It has a coil diameter of 8 inches, width of 2.5 inches and diameter of the hole of the kitchen of 1.25 inches.
5. XYZPrinting RFPLAXUS03H Da Vinci Series PLA Filament Cartridge, Light Red
Weighing in at around 1.3 pounds, this product produces high quality prints with its patented PLA material used to make them. It has a light tangerine color. The Da Vinci PLA cartridge filament has an outside diameter of 1.75 mm.
4. 3D Tantalum 618 Natural nylon filament for 3D printer 1.75mm 2 1lb Spool Bundle MADE IN USA.
This beige tungsten 3D filament printer has been made with nylon which makes it reliable strong and durable. The nylon filament does not produce odors as one prints, as it does not emit dangerous fumes. The filament resists oils, alcohols and many alkaline compounds as well. This product can be colored with most existing garment dyes.
3. Filabot 910175 Taulman 910 alloy, 1.75 “filament diameter, natural
The natural Taulman 3D nylon filament is best used at a recommended temperature of 245 degrees Celsius. It has a BuildTak that has been coated with hot PVA and warmed glass at a temperature of 45 degrees Celsius with a layer of PVA. The impression is bed or cold. It has a tensile strength of 8,100 PSI. The product weighs approximately 1 pound and has an outside diameter of 1.75 inches.
2. Filabot TB1 Braid BRIDGE Filament, 1.75 mm, White
This product is made of nylon and has an outside diameter of 1.75 inches. The Filabot 3D filament filament is white and weighs approximately 15.84 ounces. Its material makes its cost lower, but makes it functional like other filaments. The filament has a recommended printing temperature of 225 degrees Celsius and prints well on the cold bed.
1.3rDment Filaments ABS – 1.75mm, 1kg Spool – Compatible with all FDM 3D printers – Lulzbot Mini, Ultimaker, Prusa i3
This 3D printer filament has a diameter of about 1.75 mm. It comes in an assorted color and has been made using ABS material. The 3rDment filament is strong, flexible and ensures high quality 3D printing.
Searching for a 3D printer has made it easy for you with the previous guide. The filaments mentioned above have proven to work reliably and unfailingly. Your online reviews show that your users are satisfied with them. The factors to keep in mind when getting a good hatchbox filament printer have been outlined clearly and one should have good note of them.